Services · Alignment, leveling and calibration
CNC machine alignment and leveling in Iowa
My parts are out of tolerance. Can you check my machine’s alignment?
Yes. LocalSpindle of Iowa levels and aligns CNC machines across the state: leveling, geometry checks, ballbar tests, backlash and pitch compensation, turret and spindle alignment, crash recovery, and machine moves and installs. We fix the mechanical cause first, then compensate and prove it with test cuts.
- Local Iowa techs
- 30+ years in Iowa shops
- 5-star reviews
- Any brand, any age
- Call anytime
Alignment at a glance
At a glance
- Leveling: precision leveling of mills, lathes and machining centers, and re-leveling after a move or a floor change.
- Geometry: squareness, straightness, spindle to table, turret and tailstock to spindle.
- Testing: ballbar circularity tests, test bars, indicators and test cuts.
- Compensation: backlash and pitch error compensation, only after the mechanics are right.
- Crash recovery and moves: checks after a crash, and leveling, start-up and run-off after a machine move or install.
- Call: 712-883-6237, anytime.
Signs your machine needs alignment
Parts that drift out of tolerance, taper on a lathe, out-of-round circles on a mill, and anything after a crash or a move.
| What you see | Likely cause | What we do |
|---|---|---|
| Lathe parts tapered | Headstock out of level or alignment, turret or tailstock misaligned | Level, test bar, align |
| Circles out of round on a mill | Backlash, squareness, servo mismatch | Ballbar test, repair, compensate |
| Features don’t line up across the part | Squareness, worn ways or gibs | Geometry checks, adjust gibs |
| Accuracy changes as the machine warms up | Thermal growth, level, ball screw preload | Warm-up test, level, check screws |
| Bores out of position after a tool change | Spindle orientation, tool changer, worn spindle taper | Check taper and orientation |
| Problems right after a crash or move | Shifted castings, bent screws, damaged spindle | Full check and repair |
From the shop floor · Hub Kenneth
A machine that’s out of level will twist its own castings, and that shows up as squareness and straightness errors you can’t compensate away. So I always start with level. Then I fix the mechanical problems. Compensation comes last, to clean up what’s left, not to hide wear.
Ballbar testing
A ballbar test shows backlash, squareness, servo mismatch and other errors in a few minutes, and gives you a baseline to compare against later.
We run the ballbar in each plane, read the plot to find the cause, fix the mechanical or tuning problem, and re-run it to prove the result. Many shops add a yearly ballbar test to their maintenance plan.
Crash recovery
Don’t keep making parts after a crash until the machine’s been checked.
After a crash, we check the spindle for runout and bearing damage, the ball screws and support bearings, couplings, the tool changer or turret, and the machine’s alignment. We repair what’s damaged and prove the machine with test cuts. On 5-axis machines, we also re-measure the rotary centers. 5-axis repair →
Machine moves and installs
We work with your rigger to get a moved machine level, aligned and cutting again.
We disconnect and prepare the machine for the move, then level, align, reconnect and start it up at the new spot, and finish with a run-off. Moving a machine is a good time to check level, backlash and alignment anyway.
Alignment across Iowa
Alignment questions
How often should a CNC machine be leveled?
Check level at least once a year, and after any move, floor work or crash. Machines on poor floors or in buildings that shift with the seasons may need it more often.
What is a ballbar test?
A ballbar is a precision telescoping bar that measures how accurately the machine moves in a circle. The plot shows backlash, squareness, servo mismatch and other errors, so we can fix the cause and prove the improvement.
Can you fix a lathe that turns tapered parts?
Yes. Taper usually comes from a headstock out of level or alignment, or turret or tailstock misalignment. We level the machine, align with a test bar and verify with test cuts.
Can you just add compensation to fix accuracy?
Compensation helps, but only after the mechanics are right. Compensating for worn bearings or a loose gib hides the problem and it comes back. We fix the cause first.
Do you help with machine moves?
Yes. We prepare the machine, work with your rigger, then level, align, start up and run off the machine at its new location.
How much does alignment cost?
$260 per hour, plus $165 per hour travel billed one way. Most leveling and alignment jobs take a few hours to a day, and we quote it before we start.
Get your machine aligned
Machine, control and what the parts are doing. A local Iowa tech will call you back.
Or call 712-883-6237. We take calls anytime.
Related
5-axis repair · CNC mill repair · CNC lathe repair · Spindle repair · Preventive maintenance